There are three ways to supply liquid to evaporator in cold storage refrigeration system: direct supply, gravity supply and liquid pump supply.1, Direct liquid supplyDirect liquid supply is the low temperature refrigerant at the outlet of the throttle…

Roughly speaking, evaporator and condenser are heat exchange equipment, there is no difference. But in the use of evaporator and condenser is different, the condenser is used to discharge heat, evaporator is used to absorb heat.This is only from a rou…

The parts of the air conditioning system can transfer the heat in the pipeline to the air near the pipeline in a very fast way. In the distillation process, the gas or vapor into a liquid device called the condenser, all condensers are the use of gas …

The gas is passed through a long tube (usually coiled like a solenoid) to allow the heat to escape into the surrounding air. Metals such as copper conduct heat well and are often used to transport steam. In order to improve the efficiency of the conde…

1, often carry out leakage detection work of evaporator. Leakage is a common fault phenomenon of evaporator, and it should be detected frequently in the process of use.Ammonia evaporator leakage, there is a pungent smell, leakage point does not frost.…

In the refrigeration system, evaporator, condenser, compressor and throttle valve are the four essential parts in the refrigeration system, among which the evaporator is the equipment for conveying cold capacity. In which the refrigerant absorbs the h…